Lens Ø20mm -10/45° FWHM - OVAL BEAM with legs
Low profile lens with 15°x45° oval beam aperture, suitable for most 3535 led sources with 1mm squared chip and equipped with a primary lens. The correct aperture depends on the type of led source used. The lens is equipped with two pins that allow the lens to be correctly inserted into the PCB with respect to the LED and a third pin only for support.
The major axis of the elliptical beam is perpendicular to the lines of the outer surface.
LPL_D20_P1045G
Lens Ø20mm -10/45° FWHM - OVAL BEAM with legs
20
12,5
10/45
PMMA HT121
Row
Low profile lens
Quick Contact Request
Your message has been sent correctly! You will be contacted as soon as possible!
There was a problem sending the message! Please try again later, thanks.